Journal
Scientific and Technical Journal of Information Technologies, Mechanics and Optics
UDK681.7.03; 667.6; 54.056
Issue:1 (137)
Download PDF0 Kbyte
Optical composites based on organic polymers and semiconductor pigments
Annotation
The aim of the work was the development of optical organic-inorganic composite materials with high absorption of light the visible part of the spectrum and high reflection in the near infrared region of the spectrum. Such materials are used in industry and construction as coatings. To create these optical composites, epoxy and epoxy-polyurethane polymer matrices containing inorganic semiconducting particles (CuS, PbS, Fe3O4) were used. Highly dispersive powders of inorganic pigments were used for the preparation of homogeneous composite materials. The wet precipitation method with the application of organic stabilizing additions was applied for the preparation of dispersive CuS and PbS powders. Optical microscopy and X-ray diffraction analysis helped to study the crystal structure and morphology of the obtained semiconductor pigments. PMT-3 device was applied for microhardness measurements of the prepared composite materials. Based on the data of X-ray diffraction analysis, the average crystallite size was calculated using the Scherrer formula. It was found that freshly precipitated CuS and PbS powders consist of nanocrystals with a size of 11–20 nm. Optical microscopy data indicate the formation of aggregates of semiconductor nanocrystals in powders. Experiments have shown that all synthesized composites have low light reflection coefficient (less than 0.06) in the visible part of the spectrum and an increased light reflection coefficient in the near infrared region of the spectrum (0.13–0.15 and more). The results of the study showed that the use of epoxy-polyurethane polymer matrices provides greater microhardness of composite materials, compared to the composites based on epoxy polymers. The highest microhardness values were observed in composite materials based on epoxy-polyurethane polymers containing highly dispersed Fe3O4 particles. Obtained organic-inorganic composites could be used as materials for light-absorbing coatings in different industrial applications.
Keywords
Постоянный URL
Articles in current issue
- A study of a silicone film deposited on quartz glass under laser radiation
- A new algorithm for the identification of sinusoidal signal frequency with constant parameters
- A study of silicon p-n structures with mono and multifacial photosensitive surfaces
- Detection of yawning in driver behavior based a convolutional neural network
- A Game Theory approach for communication security and safety assurance in cyber-physical systems with Reputation and Trust-based mechanisms
- A study of the influence of human factors on the speed of urban rail transport
- An algorithm for detecting RFID-duplicates
- Reduction of LSB detectors set with definite reliability
- Classification of objects in images with distortions based on a two-stage topological analysis
- Dimensionality reduction of the attributes using fuzzy optimized independent component analysis for a Big Data Intrusion Detection System
- An optimal swift key generation and distribution for QKD
- A study of vectorization methods for unstructured text documents in natural language according to their influence on the quality of work of various classifiers
- Recognition the emotional state based on a convolutional neural network
- Intellectualization of personnel development management in high-tech service-oriented companies
- A study of the efficiency of the magnetic compass correction system
- A new analytical model of drain current and small signal parameters for AlGaN-GaN high-electron-mobility transistors
- Imputation and system modeling of acid-base state parameters for different groups of patients
- Construction of movement trajectories for objects based on the Dubins car problem, taking into account constant external influences
- A mathematical model of an epidemic with an arbitrary law of recovery
- Simulation of the pulsed outflow of air and fine powder mixture, partially filling the discharge channel
- Vectorized numerical algorithms for the solution of continuum mechanics problems
- A comparative analysis of computational intelligence algorithms for estimation of LTE channels
- Implementation of a clinical decision support system to improve the medical data quality for hypertensive patients